The Short Answer
Siemens held roughly 38% of the global PLC market in 2024, depending on whose analyst report you read (and I've read four of them, unfortunately). That number is impressive. It's also basically irrelevant to whether you should buy S7-1500 hardware for your next line upgrade.
Here's what matters instead: your five-year total cost of ownership will be driven by TIA Portal licensing fees, training course costs, and spares availability—not by market share. I've tracked every Siemens-related invoice since Q1 2018, and market share never once appeared on a purchase requisition. The cost drivers that did?
Let me walk you through them.
Why You Should Trust Me on This
I'm a procurement manager at a 240-person systems integration firm. I've managed our automation hardware budget—about $380,000 annually—for six years. In that time I've negotiated with 22+ vendors, including three authorized Siemens distributors, and documented every order in our cost tracking system. When our engineering team says "we need S7-1500," I'm the person who has to figure out what that actually means for the P&L.
I'm not a Siemens cheerleader. I'm not a Rockwell partisan either. I'm the person who gets yelled at when the budget overruns. So when I say market share doesn't matter, it's because I've watched it not matter.
The Real Cost Drivers (Ranked by How Much They Surprised Me)
1. Training courses are the hidden line item nobody quotes
When we standardized on Siemens S7-1200 for our smaller projects in 2021, the distributor quoted us $2,840 per unit for the CPU and I/O. Great. What they didn't mention: our existing technicians were Rockwell-trained. Every one of them needed the TIA Portal programming course before they could touch the new equipment.
Siemens' official training courses in our region ran about $2,200 per seat for a five-day TIA Portal Programming 1 course (as of Q2 2023, though I've seen it fluctuate between $1,950 and $2,400 depending on the training center and whether it's virtual or in-person). For our five-person maintenance team, that was $11,000 before anyone had written a single line of ladder logic.
"I assumed 'same specifications' meant comparable ramp-up time across vendors. Didn't verify. Turned out the Siemens ecosystem, while powerful, has a steeper learning curve for people who cut their teeth on RSLogix."
So when you see the per-unit price on a Siemens PLC and compare it to a competing brand, you're comparing two different numbers. One includes training. The other doesn't. I built a spreadsheet after getting burned on this twice.
2. VFD integration isn't just about the diagram
You'll see "vfd diagram" all over the search results when people research Siemens PLCs. Here's the thing most buyers—especially the ones who aren't control engineers—miss: the diagram is the easy part. Getting your VFD to talk to your S7-1500 over PROFINET requires the right drive firmware, the correct GSD file, and ideally a Siemens Sinamics drive that plays nice with TIA Portal out of the box.
We tried saving money once by pairing a non-Siemens VFD with an S7-1200. Technically doable. Practically? The integration labor ate up the $600 we saved on the drive in the first afternoon. (ugh, never again).
3. "Fuse box vs circuit breaker" matters more than you'd think for PLC cabinets
This is one of those questions that seems basic until you're specifying a control cabinet. Most buyers focus on the PLC brand and completely miss the protection architecture. In our 2022 audit of 14 control panels, we found that three used fuse holders where mini circuit breakers would have been more appropriate for the inductive loads on our conveyor VFDs. Fuses blow. Breakers reset. When you're running 24/7 production and a blown fuse takes down a line, the "cheaper" fuse protection becomes very expensive very quickly.
USPS doesn't regulate control cabinets, obviously, but I mention this because the same principle applies: the thing you see on the quote (the PLC) isn't the thing that determines reliability. It's the supporting infrastructure.
The Market Share Number, Properly Contextualized
Fine, let's actually talk about the 38% figure. According to market research from several analyst firms covering 2024, Siemens remains the global leader in PLC hardware, with estimates ranging from 35% to 41% depending on how you define the category (does LOGO! count? does the S7-200 SMART in China count?). The closest competitor sits around 30%.
What that means practically: you'll have an easier time finding Siemens-experienced integrators, spare parts tend to be more available, and the secondary market for used S7-300 modules is healthier than for most alternatives. Those are real advantages. But they're advantages of scale, not of unit economics.
I have mixed feelings about this. On one hand, ecosystem lock-in is real and it makes my life easier when I need a replacement S7-1500 CPU overnight. On the other hand, I've watched vendors price Siemens components at a premium because they know we're locked in. That convenience has a number attached to it, and it's not small.
The Checklist I Actually Use Before Approving a Siemens PLC Purchase
This is the 9-point list I run through before I sign off on any automation hardware order over $5,000. It has saved us an estimated $14,000 in potential rework and hidden fees since 2022.
- Training cost per technician—not just the course fee, but the lost billable hours during the training week.
- TIA Portal license tier and duration—do we need a permanent license or can we float it? We were paying for three simultaneous seats when we only needed two (that cost us about $2,400/year until I caught it).
- Spare parts lead time—I ask the distributor for their actual stock position on the specific CPU model, not their general "typically available" statement.
- VFD compatibility confirmation—in writing, from the drive manufacturer, not just "it should work with PROFINET."
- Cabinet protection spec—breaker vs fuse decision documented and justified, not defaulted.
- Firmware version alignment—a surprisingly common source of commissioning delays.
- Shipping and customs—for our overseas orders, freight and duty add 8-12% on average (I'd cite a specific USPS rate, but ours ship LTL freight, so that's not the right reference point here; just know that freight is never free no matter what the quote implies).
- Warranty terms on software—Siemens handles hardware warranty differently than software licensing, and the overlap period can create gaps.
- Exit cost—what would it take to switch this specific application to another brand in three years? If the answer is "we'd have to re-engineer everything," I want to know that before I sign, not after.
Five minutes of verification beats five days of correction. That's not a slogan—it's the reason my budget request didn't get rejected last quarter.
When Siemens PLCs Are the Wrong Choice
I'd be doing you a disservice if I pretended Siemens is always the answer. It isn't.
If you're running a small operation with fewer than five control points and no existing Siemens footprint, the training overhead alone may not justify the ecosystem. A simpler controller from another brand—or even a LOGO! if you truly need minimal functionality—might get you running faster and cheaper.
If your team is deeply invested in another platform and your applications are straightforward, switching to Siemens because of market share is a bad trade. Market share doesn't program your equipment.
And if your primary concern is the absolute lowest per-unit cost with no regard for five-year TCO, you're not really shopping for Siemens anyway. That's a different conversation.
But if you need long-term parts availability, a deep bench of experienced integrators, and an ecosystem that scales from a single S7-1200 to a plant-wide S7-1500 deployment, the market share number—for once—actually does reflect something useful. Just don't let it be the only number you look at.
Training course pricing referenced from Siemens' official training catalog, accessed January 2025. Market share figures based on consolidated analyst estimates for 2024. Verify current pricing with your regional distributor before budgeting.
Leave a Reply